Delta Seal / Delta Seal GZ - Application and Performance

In this section:
Overview | Properties | Application and Performance

Application:
Delta Seals are used as a top coat for Delta Tone, Delta Protekt KL100, aluminium and electroplated finishes to greatly enhance protection. To obtain a closed uniform coating a minimum of 5µ with a dry coat weight of 9g/m² is required.

Products processed in a basket by dip spin:
Bolts, nuts, dowels, clips, clamps, torsion springs, small castings, and small pressings as well other fixing elements used in the automotive industry, construction industry, and steel industry.

Products processed on jigs by Spray:
Large work pieces such as stampings and pressings, large compression springs, chain, and guide rails, fixing plates, trailer couplings.

Degreasing:
All the well known processes can be used that have no detrimental effect on the parts may be used.

Scale/rust:
All well known chemical pickling processes as well as shot blasting processes using suitable abrasives may be adopted unless they are detrimental to the parts in question.

Zn-Phosphating
Delta Seals can be applied directly onto Zinc Phosphate.

Performance:
The protective effect of Delta Seal increases with the number of coats added.
To obtain a closed uniform coating a minimum of 5µ with a dry coat weight of 9g/m² is required.
This information is based on our current knowledge and our interpretation of the specifications.
Corrosion protection is dependent upon the build-up coats, geometry and type of application.
No legal guarantee can be derived from our information. 06.06.2007/Rev.13


"Anyone looking for high corrosion protection can now confidently dispense with Chrome VI"



























Delta GBN Ltd
+44 (0) 121 602 1221